|10||$450||Up to $500|
|20||$400||Up to $2,000|
This head has been tested with our MCR-EVO series devices (EVO, EVO-K, EVO-K1) and we can guarantee it works 100%.
We can't guarantee how it works with other devices on the market
0.5mm - THIN 3.6mm - WIDTH 6.7mm - LENGTH
Note: The thickness can vary with up to + 0.12mm
Get it cheaper in the
MCR-EVO Combo 0.5mm
MCR-EVO (1,000USD) +0.5mm head 500USD=1,500USD 1,250USD
This 1 track magnetic head, when used with any of our magnetic card readers, can record the data on the magstripe card when the card reading swiping is made. If the card reading swipe was interrupted, recovering the data on the magstripe tracks depends entirely of the magnetic stripe card reader and NOT of the magnetic head.
The magnetic head only reads the signal provided by the magstripe on the card and transmits the data to the magnetic card reader.
In this case, this head can read only one track from the magstripe card. The tracks that can be read from the magstripe depends of the position of the head. It can read the track 1, track2 or track 3 depending how it is placed.
Please note that the magnetic head if sold separately or within a combo deal will not come with any rail that the card reading swipe can be made on, so the rail it's the client responsability.
This product is guaranteed to be free from defects in materials and workmanship for 30 days since the date of purchase. MyCardReader.com will without charge, repair or replace at our option, any product returned for warranty work and found to be defective by us.
VERY Important!!! Please note that we test every magnetic head before being sold and we make sure that they are in perferct working condition. Even though we have tried to protect it as much as possible by applying a protection layer over it, it is still a 0.5mm thin magnetic head, so please be very careful not to break the wires or the head itself.
MyCardReader.com will NOT replace any products if damaged by the client!