No products

Shipping $0.00
Total $0.00

Cart Check out




MCR Evolution Tutorial


Note: If you have already installed the MCR Evolution, scroll down to the video.


How to install MCR Evolution software:

    • 1. Download the MCR Evolution software from here
    • 2. Install the program (double click on "MCR Evolution Setup.exe", click next, agree with our terms and conditions, choose typical install, click next until installed).
    • 3. Put in the interface received with the device. The computer will search for the driver and install it automatically.
    • 4. Connect the MCR-SX device to the interface.
    • 5. Ready to use



     If you can not see any COM after you have installed the MCR Evolution:
Reason: This is because you have introduced the interface into the computer before you have installed the MCR Evolution.

  • Make sure you have the interface still connected to the computer.
  • Go to "device manager", click on "USB Ports" go to the "Unkown device", right click on it, click "Update driver".
  • If this doesn't work, than click "uninstall"
  • Remove the interface from the computer
  • Uninstall the MCR Evolution
  • Repeat the steps above from "How to install MCR Evolution software"



How to use the MCR Evolution software:

This is a video that shows how the MCR Evolution can be used.

Please note that the MCR Evolution only works with the MCR-SX1 and MCR-SX2. It will NOT work with the devices from the MSCR Series.